Get latest Cisco 300-420 Dumps. Updated with real exam questions and answers, exam preparation study material, and 300-420 (ENSLD) practice exam with 100% passing scores.
| Exam Code | 300-420 |
| Exam Name | Designing Cisco Enterprise Networks (ENSLD) |
| Update Date | 27 Jul, 2024 |
| Total Questions | 242 Questions Answers With Explanation |
Before studying for the Cisco 300-420 (Designing Cisco Enterprise Networks) certification exam, you may have questions about the latest format, accurate questions types and amount of time needed to finish the questions. So, you can get these real, authentic and up-to-date sample questions or exam demo at Dumps4Solution official account which will help you clear your doubts and prepare for the Cisco certification according the correct and current pattern of exam.
To advance your career opportunities and increase your income, you should pass the Cisco 300-420 Certification. Exam dumps from Dumps4Solution assist you in passing your Cisco test. Having passed the Cisco 300-420 exam, you can demonstrate your competence in critical technical tasks and your verified skill set. However, you will have to finish a self-assessment if you want to pass the Cisco 300-420 certification exam with high marks. To answer relevant exam questions, you must assess your knowledge and identify any areas that need improvement. The Dumps4Solution online test engine provides you with comprehensive assistance in this regard. If you don't evaluate yourself and don't make any progress, you might not pass the test.
Finally, I got my 300-420 certification done with the help of Dumps4solution. Excellent study material. Much recommended
Valid sample exams for the 300-420 certification. Very helpful. Passed my exam with 85% marks. Thank you Dumps4solution.
A company needs to increase access port capacity on one floor of a building. They want to leverage the existing catalyst access switch. There is no problem with uplink bandwidth capacity. However, no additional uplinks can be added because no ports are available on the distribution switches. Which solution must the company choose to provide additional access ports?
A. VDC
B. VSS
C. Etherchannel
D. Stackwise
Which information update is carried by OMP and enables the Cisco SD-WAN to build a secure overlay fabric on top of any public or private transport without regard for the actual link IP?
A. TLOC
B. RLOC
C. LISP PITR
D. DTLS
Since installing a cisco TelePresence system, the company is experiencing other application having response issues when the system in use. As a result, the company asked an architect to recommend a QoS solution. The customer is currently using a CBWFQ policy to manage traffic on an internet connection with a speed of 100 Mbps. Which link-capacity limit must the architect choose for strict-priority for the real-time traffic?
A. 25 Mbps
B. 50 Mbps
C. 33 Mbps
D. 75 Mbps
In a cisco SD-Access brownfield deployment scenario, which configuration deployment must be taken with Cisco DNA center?
A. Subnet stretching
B. LAN automation
C. Automated UNDERLAY
D. Manual underlay
An engineer must peer with an ISP for internet connectivity using BGP, initially, the engineer wants to receive only specific prefixes from the ISP and a default route. However, the solution must provide the flexibility to add prefixes in the future at short notice. The ISP has a two-week change process in place. Which route filtering solution must the engineer employ?
A. Request a limited internet routing table and a default route from the ISP and configure the BGP
max-limit to 1 with an access list that permits only the specific internet prefixes and blocked networks
B. Request only the required prefixes and default route be advertised from the ISO with whitelisted
networks
C. Request a full internet routing table and a default route from the ISP and configure inbound route
filtering with a prefix list that permits the default route and required prefixes
D. Configure outbound route filtering on the enterprise and ISP so that the enterprise tell the ISP which
prefixes are required
An engineer is designing a BGP network for a large customer. To permit efficient scaling, the BGP domain is split into clusters. Which peering solution should be used between the route reflectors in different clusters for the BGP routes to be propagated appropriately?
A. The route reflectors should be made dents of each other.
B. The route reflectors should be nonclients with regards to each other.
C. The route reflectors should not have any kind of BGP peering.
D. The route reflectors should have peering through another nonclient router.
An engineer must design a routing solution for a company that is single-homed to an ISP. The company's goal is to run BGP between theCEand the PE devices. To support running BGP, the company obtained a public AS number and IP subnet from ARIN. Which solution must the engineer select?
A. The customer announces the public IP subnet to the ISPThe ISP announces the default route to the customer.
B.The customer announces the public IP subnet to the ISPThe ISP announces the BGP table to the customer
C. The ISP announces the customer public IP subnet.The ISP announces the partial BGP table to the customer.
D. The customer announces the default route to the ISPThe ISP announces the default route to the customer
A company plans to transition to IPv6. They will link their IPv4 addresses to the lowest significant bits of the new Ipv6 addresses. A network administrator with an employee id: 4264:42:116 is preparing a mapping schema for the new IPv6 addresses. Which address does the 172.16.10.0/24 network translate to?
A. 2001:db8:abcd::ac10:a00/120
B. 2001:db8:abcd:172:16:10::/96
C. 2001:db8:abcd:11d8:a00/120
D. 2001:db8:ac10:0a00::/64
Which two overlay network design considerations must be made for a Cisco SD-Access network? (Choose two.)
A. LAN automation for deployment
B. Layer 3 to the access design
C. Reduce subnets and simplify DHCP management
D. Dedicated IGP process for the fabric
E. Avoid overlapping IP subnets
Which WAN connectivity technology is optimal for edge computing compared to others and why?
A. Due to low latency, high bandwidth, and closest proximity to the user. 4G/5G connectivity is the optimal WAN technology for edge computing compared to L3 VPN MPLS connectivity, which offers native separation and security with close proximity to the data center.
B. Due to high bandwidth, separation and security, and proximity to the data center network. DWDM Is the optimal WAN technology lor edge computing compared to 4G/5G connectivity, which offers native separation and security with close proximity to the data center.
C. Due to low latency, high bandwidth, and closest proximity to the user, L3 VPN MPLS connectivity is the optimal WAN technology for edge computing compared to 4G/5G connectivity, which offers native separation and security with close proximity to the data center.
D. Due to low cost, high bandwidth, low latency, and closest proximity to the edge of the network, Mero Ethernet is the optimal WAN technology for edge computing compared to MPLS, which offers native separation and security with close proximity to the data center.
Isabella Martinez - Jul 27, 2024
IF YOU ARE LOOKING TO PASS OR PREPARE FOR THE ONLINE 300-420 EXAM, THEN DUMPS4SOLUTION IS THE RIGHT PLACE WHERE YOU CAN GET HELP TO PASS THE EXAM SUCCESSFULLY. I HAVE ALSO PASSED THE 300-420 EXAM WITH UPDATED QUESTIONS AND ANSWERS.